Join our mailing list!

You are here: Home > Electronics > Power Amplifier
Sort By:
Page of 1
Vincent Audio SP-331 Hybrid Stereo Power Amplifier Tube/Solidstate
Vincent Audio SP-331 Hybrid Stereo Power Amplifier Tube/Solidstate
Our Price: $1,599.99

New factory sealed Vincent Audio SP-331 Hybrid Stereo Power amplifier. 120v U.S. version. Available in Silver or Black.

The words ‘no nonsense’ and ‘luxurious’ usually don’t go together, but the Vincent SP-331 power amplifier is a rule breaker. It combines the warmth of tube electronics with the speed, control, and reliability of solid state designs. The input stage relies on one 6N16 tube per channel for liquid, effortless-sounding audio. The output stage gets its muscle from 6 Toshiba transistors per channel. The SP-331 boasts a power delivery of 150-watts-per-channel at 8 ohms, and a full 300-watts-per-channel at 4 ohms. The means you harness plenty of ‘oomph’ for the full effect of realistic orchestral crescendos and complex music passages.

Specifications:

Frequency range: 10 Hz – 20 kHz, +/- 0.5 dB
Nominal output power 8 Ohm: 2 x 150 Watt
Nominal output power 4 Ohm: 2 x 300 Watt
Input sensitivity: 1.2 V
Total harmonic distortion: < 0.1 % max. (1 kHz, 1 Watt)
Signal-to-Noise Ratio: > 90 dB
Input Impedance: 47 kOhm
Inputs: 2 x RCA
Outputs: 4 x 2 speaker terminals
Dimensions: 17″ wide, 6.3″ high, 17.7″ deep
Weight: 41.5 lbs
Vincent Audio SV-237 Hybrid Integrated Amplifier Remote Control tube/solidstate
Vincent Audio SV-237 Hybrid Integrated Amplifier Remote Control tube/solidstate
Our Price: $2,599.99

New factory sealed Vincent Audio SV-237  Hybrid Integrated amplifier. 120v U.S. version. Available in Silver or Black.

The SV-236MK was Vincent Audio’s most successful amplifier of all time. The new SV-237 integrated amp improves upon its predecessor. The circuit design was completely revised to provide better overall sound, including improved musicality and transient response. And it will drive even ‘difficult’ loudspeakers effortlessly.

The hybrid tube/transistor design brings you luxurious ‘golden age’ sound and solid state reliability. The second stage of the preamplifier section uses a pair of 6N1P-EV vacuum tubes. Their greater voltage level provides improved signal stability with higher spectral purity that brings out the fine details of a recording. The musicality of the tubes shines through! The sound is never cold or analytical.



Features:

150 watts RMS into 8 ohms, 250 watts RMS into 4 ohms
First 10 watts in pure ‘Class A’ mode
Hybrid vacuum tube and transistor design
Built-in Texas Instruments PCM2705 stereo DAC for USB input
Tube complement: 1 x 12AX7 and 2 x 6N1P-EV
Front panel controls: on/off, volume, input, treble, bass, tone control bypass switch, loudness
Four pairs of five-way speaker binding posts
Wireless remote control
Specifications:

Frequency response: 20 Hz – 20 kHz ± 5db
Power output: 150 watts RMS into 8 ohms; 250 watts RMS into 4 ohms; first 10 watts in pure ‘Class A’ mode
D/A conversion: Texas Instruments PCM2705 16-Bit Delta-Sigma stereo DAC with 32, 44.2, and 48 kHz sampling rates
THD: <0.1% (1 kHz, 1 watt)
Input sensitivity: 350 mV
S/N ratio: 80 dB
Input impedance: 47 k ohm
Dimensions: 16.8″ wide, 6″ high, 17″ deep
Weight: 45 lbs
Vincent Audio SP-331MK Hybrid Stereo Power Amplifier Tube/Solidstate
Vincent Audio SP-331MK Hybrid Stereo Power Amplifier Tube/Solidstate
Our Price: $2,749.99

New factory sealed Vincent Audio SP-331MK Hybrid Stereo Power amplifier. 120v U.S. version. Available in Silver or Black.

Elegant, timeless, clean technology, perfection for an end stage. Here valves create the typical sound that is amplified in the power area by the transistors. In addition, the new voltage stabilisation works with a 12 AU7 valve and thereby provides a trouble-free 10W in Class A operation. The secret tip.

Specifications:

Frequency response: 10 Hz – 50 kHz +/- 0.5 dB
Nominal Output Power RMS/8 Ohm: 2x 150W
Nominal Output Power RMS/4 Ohm: 2x 300W, Class A/8 Ohm: 2x 10W
Total harmonic distortion: < 0.1 % (1 kHz, 1 Watt)
Input sensitivity: 1,5V, Signal-Noise ratio: > 95 dB, Input impedance: 47 kOhm,
Inputs: 2 x RCA, Outputs: 4 x 2 Speaker Terminal (A & B), Mains supply: 120 V/60 Hz
Colour: black/silver, Weight: 22 kg, Tubes: 2 x 6N16, 1 x 12AU7
Dimensions (WxHxD): 430 x 195 x 400 mm
Vincent Audio SP-T800 Hybrid MONO Power Amplifier Tube/Solidstate
Vincent Audio SP-T800 Hybrid MONO Power Amplifier Tube/Solidstate
Our Price: $2,849.99

New factory sealed Vincent Audio SP-T800 Hybrid Mono Power amplifier. 120v U.S. version. Available in Silver or Black.

The new Vincent SP-T800 mono power amplifier keeps its inner quality well hidden behind an unassuming yet inarguable stylish exterior. The sculpted chassis, available in black or silver finish, conceals a true powerhouse of a performer. Its operation is characterized by a lively presentation plus an effortless quality with the most difficult source material. The SP-T800 delivers clean and potent 200 watts of musical power at 8 ohms, thanks to the combined might of the eight high-power transistors.

Specifications:

Power output: 200 Watts at 8 ohms, 320 Watts at 4 ohms
Frequency response: 10 – 50,000 Hz
Distortion: 0.1%
Input sensitivity: 1.1 V
Signal-to-noise ratio: > 90 dB
Input impedance: 47 k ohm
Dimensions: 8.2″, 10.4″, 15.7″
Weight: 39 lbs.